Technical data

120 Description
G-30-1682-en OPMI® Lumera® T Issue 4.0
Printed on 02. 02. 2009
S8 ceiling mount
Intended use
The S8 ceiling mount is a suspension system for Zeiss surgical micro-
scopes. It is used to power and control the motorized functions of the sur-
gical microscope. The hallmarks of the S8 ceiling mount are its superb
mobility and easy operation. The motorized functions can be activated
using a foot control panel.
Further useful functions include, for example:
– magnetic brakes for almost effortless positioning,
– fully automatic lamp change in the halogen light source,
– brightness control via a foot control panel,
– reset of X-Y coupling, focus and zoom,
– standby position,
– user-defined basic settings for a maximum of nine users:
– speeds for focus, zoom and X-Y coupling
– and configurable buttons on the foot control panel for focus mem-
ory, XY inversion, camera release, swinging SDI in/out, triggering
an AUX signal.
Warning!
When using the Superlux Eye light source, only operate the system with
special xenon lamps approved by Carl Zeiss for ophthalmic surgery. If any
other than Carl Zeiss-approved xenon lamps are used, there is the risk of
severe injury to the patient's eye.