Manual

Instructions for use Vict
Note: The adjusting screws are provided with an integral circular seal.
The adjusting screws do not need to be tightened further after adjustment.
The interior of the Z-Point is exposed to the effects of the environment if the
adjusting screws are completely removed.
Care and maintenance
A Carl Zeiss Z-Point needs no special care.
Do not wipe off coarse dirt particles (e.g. sand) from the lenses, but blow
them off or remove them with a soft brush.
Fingerprints on the lens surfaces may affect them in the course of time.
The easiest way to keep the lenses clean is by breathing on them and wiping
with a soft optical cleaning cloth or optical cleaning paper.
To avoid a possible fungal coating which is common in the tropics, store the
optics in a dry place and always ensure good aeration of the lens surface.
Important
The cover of the solar cell is made from a transparent plastic which is
extremely resistant to impact; it is also resistant to the usual cleaning
materials.
You must not use any cleaner with a high alcohol content (or solvent) to
clean the transparent plastic, the housing or attachments.
Never look at the sun or a laser light source through the Z-Point. This can
lead to serious injury to the eye.
602950_ZEISS_GBH 02 Victory_Z-Point_Innen/S. 8/Cyan = Pantone Reflex Blue/Schwarz 602950_ZEISS
Inde
Prote
Spare
Allen
Prote
Mag
Dot
Adju
Heig
Widt
Leng
Weig
Tech
Subje
develo
02 Vict_Z-Point_innen_pan.qxd4 03.01.2007 15:47 Uhr Seite