Specifications

KF 2

ICS

Carl Zeiss

B 40-028 e 10/97 3-11

3.7 Photomicrography

The KF 2

ICS

microscope (with phototube) can be changed from observation to photography via the

pushrod (3-8/7). Special connectors and the T 2 adapter allow commercially available 35 mm SLR

cameras and special microscope cameras (e.g. MC 80

) to be attached to the camera port of the KF 2

ICS

. For the use of the photomicrography equipment, please observe the relevant separate manuals in

addition to the information provided in this manual.

Assembly (e.g. CONTAX 167 MT)

Screw the T 2 adapter of the camera used on

the connector 2.5 for T 2 (3-8/4).

Attach the camera and fix the cable release

(3-8/1), if required.

Loosen the three hexagonal screws (3-8/6),

remove the dust cover (3-8/8) from the

phototube (3-8/5) and insert the premounted

unit A in the phototube.

Align the unit in the required position and

tighten the three hexagonal screws (3-8/6).

If focusing is not to be made via the

viewfinder of the camera, the

component with the photo reticle

must be screwed in the eyepieces

(also see section 3.3).

For detailed information on SLR

cameras please see manual G 42-

406/II entitled "35 mm SLR cameras

for microscopes and stereo-

microscopes".

Fig. 3-8 Assembly of a SLR camera

(CONTAX 167 MT)