Technical data

Installation of the AxioCam MRc5
AxioCam MRc5 Installation + Reference 29
How to correct the driver entry in the device
manager
NOTE:
 In this chapter the correction of the driver entry is described with
Windows 2000 Professional screen shots, but the procedure is similar
under Windows 2000 Professional and Windows XP Professional.
If the entry in the Device Manager must be corrected, i.e. if a question mark
or an exclamation mark is in front of the
AxioCam MRc5
entry, proceed as
follows.
Please make sure that during all the steps described below, the CD-ROM
containing the AxioCam MRc5 driver remains inserted in the CD-ROM drive of
your computer.
Start the systems Device Manager:
 Click Start
⇒
Settings
⇒
Control Panel.
 Double-click the System icon. The System Properties dialog will be
displayed. Select the property page Hardware and click the Device
Manager
button.
 Under Imaging devices double-click on Carl Zeiss AxioCam MRc5.