Technical data

Image Acquisition
20 Printed 10.2013
the bottom of the image window
 Using the Navigator you can
magnify or reduce the image and
position the displayed image area in
the overview window.
 Click on this icon to save the image
you have generated to the
computer’s hard drive.
Notes:
 Once you have found a good camera setting, you can save it with the
Settings Editor in the Tool menu and load it again automatically in the
future. This allows you, for example, to acquire particular samples
under the same conditions every time.
 To allow correct scalings to be selected in the footer of the live image
during acquisition, you need to have generated these before you start
your work. If you are using a motorized or encoded microscope, the
scalings can be allocated automatically. For further information, see
Chapt. 9 "Configuration" in the AxioVision Manual.