Technical data

Image Acquisition
Axiocam 105 color Installation + Reference Guide 17
Make changes for the camera settings on the following controls:
 The central element is the setting for
the exposure time on a digital
camera. The Measure button can
be used to determine an optimum
exposure time.
 If you are using a color camera, you
need to perform a white balance for
the image. If you select the
automatic balance (Automatic
button), the camera tries to
determine an optimum value itself.
 Using the Warmer/Colder slider you can shift the target value of the
white balance to warmer ( redder) or colder ( bluer) tones.
 The Show Channels check box allows you to switch to an alternative
setting option if you wish to influence the target value of the white
balance manually for each channel.
 If you are using a color camera, you
need to perform a white balance for
the image. If you select the
automatic balance (Automatic
button), the camera tries to
determine an optimum value itself.
 Enter further settings for the selected camera on the Adjust, Frame
and General property pages.
 Click on the camera icon to acquire an individual
image, or in the Acquisition menu click on Snap.