User manual

1. Open the camera by raIsmg the two
winding keys (y) on the came ra base-
board and giving them a half turn.
In the open position the k eys cannot
be folded down against the camera body .
2. Draw down the camera back slightly
and then raise it away from the camera
body.
3. Wind up the shutter winding knob (a)
as far as it will go in a clockwise dire c-
tion , until a hard stop i~ felt. (A slight
resist ance may not mean that the
shutter is fully wound, so that it is
necessary to turn fully until the stop
is reached.)
5