User manual
is
opposite
the
red
dot
on the
camera
body
By
turning
it to the
left
(anti-clod<lvise) the catch
spring
(12)
snaps
back into place.
Lenses
with
outside
bayonet
mount
are
placed
into the
CON
T A X by
bringing
the
red
dot
on
the
lens
opposite
the
red
dot
on the
camera
body
The
lens
is
then
turned
to
the
left until a
stop
is
felt,
and
the
catch will
snap
i
nto
position.
The
removal of
the
lenses with
outside
bayonet
mount
follows
the
same
procedure.
The
side catch
must
first
be
released
and
then
the lens
is
turned
until
the
two red
dots
are
opposite each
other
It
is
recommended
for inserting
and
removing
that
the
lens be
grasped
with the
right
hand
in such a
manner
tbat
the
top
of
the
right
thumb
rests
on
the red
dot
of
the
lens.
This
procedure
will
aid
in
interchanging
the lenses
rapidly
because
by
bringing
the two
thumbs
together
the most
favourable
posi-
tion of lens to
camera
can
be
obtained.
The
CON
T A X lenses
are
all fitted with
the
same
inner
or
outer
bilyonet
mounting,
permitting
their
use on
different
CON
T A x
bodies. All lenses from
earlier
CON
T A X models,
with the exception
of
the
old-type
Biogon,
can
also
be
fitted
to the
new
CONTA
X .
Removal
and
interchang-
ing
of
the
lenses
on
the
CON
T A X
may
be
effect-
ed
in
fuJI
daylight
without
any
extra
precaution
or
any
spoiling
of
film.
29