User guide

1 ProofMate™ (ProofReady) Plugin for HP Printers
44 AG50241 Rev. 4
6. Choose (->Default) from the ICC Rendering Intents or Main intent menu,
depending on your RIP version.
7. Set the remaining options as desired. For details of these options see the Harle-
quin Color Production Solutions User’s Guide or the Harlequin ColorPro
™
User’s Guide.
8. Click
Save As to save this color setup.
9. Enter a name for the color setup in the
Save As text box in the Save Setup dialog
box. Click
Save and then OK to close the Color Setup Manager.
You can use this color setup in a page setup. A list of color profiles provided is given
in “Supplied profiles” on page 18.
1.10 Using the Harlequin Full Color System (HFCS)
In RIP v.5.x, the Harlequin Full Color System (HFCS) can be used to create a color
setup, as described in the Harlequin Color Production Solutions User’s Guide.
Take care to select an appropriate profile for the paper being used and ensure that the
resolution and screening settings are as required by the profile.
When using HFCS there is no need to install ICC profiles for the printer because
HFCS will automatically produce color rendering dictionaries from the data contained
in the selected profile. Should you wish to do so, however, it is possible to install and
use ICC profiles with HFCS in the same way as with HIPP.
1.11 Troubleshooting and tips
This section describes messages that may appear in the RIP monitor window and
offers troubleshooting advice and tips on how to maximize your use of the plugin. If
you have difficulty understanding any message, report the exact message to your sup-
port organization.
Note: Most of these messages appear in the RIP monitor window and are preceded by
details of the plugin and device that you are using. For example:
%ProofReady - HP (DesignJet 2000CP Roll) : Message.