User guide

1.9 Creating a HIPP or ColorPro color setup
AG50241 Rev. 4 43
Having created the ICC profile, install it using the menu option Color > Install ICC Pro-
file
. In the Linear Calibration From menu in the Install ICC Profile dialog box choose
either:
•
Linear if the page setup you used contained no color management data (raw
state); or
• The name of the calibration profile or calibration set that you used in the page
setup (golden state).
You can create a color setup using this profile, see Section 1.9 for details.
1.9 Creating a HIPP or ColorPro color setup
“Getting started” on page 9 demonstrated how the selection of a calibration profile
(pre Eclipse Release RIPs) or a ProofReady profile (Eclipse Release or later RIPs)
automatically includes a default color setup to provide instant color management. The
color profiles used in the default color setups are also available for the creation of your
own color setups. Alternatively, you could also create a color setup using imported
ICC profiles. See “Creating and installing ICC profiles” above for further information.
Creating your own color setup allows you to specify the input profiles as well as other
color setup options.
Follow these steps to create a color setup:
1. Choose the menu option
Color > Color Setup Manager.
2. Choose the device for which you want to create this color setup from the Device
menu.
For example, choose
DesignJet 1050C Roll.
3. Click
New or New ’ColorPro’ Setup, depending on your RIP version.
4. If using a pre Eclipse Release RIP, click
Create in the ICC (HIPP) section of the
Create Color Setup dialog box.
5. In the New Color Setup dialog box, choose the options for the color setup you
are creating.
For example, choose
3M Matchprint for the CMYK input profile and sRGB
for the RGB input profile and then choose
HP Heavy Coated 600 as the
output profile.