User guide

1.4 Getting started
AG50241 Rev. 4 13
Ä Choose CMYK Composite from the Style menu if you are using a color device. If
using a monochrome device, choose either
Monochrome or CMYK Separa-
tions
.
Å For color devices, check in the Edit Style dialog box that screening is set to its
default value of
HDS Super F.
To open the Edit Style dialog box,
click the Separations Manager
icon. Click
Edit in the Separations
Manager and check the screening
option in the
Dot shape menu. Click
OK twice to return to the Page
Setup dialog box.
Æ Choose (None) from the Color
menu.
Note: Selecting a calibration profile or calibration set includes a default color
setup. You can choose an option from the
Color menu if you wish to use a color
setup that you have previously created. See “Creating a HIPP or ColorPro color
setup” on page 46 for details.
Ç Choose a profile from the Calibration menu that matches the currently selected
ink/paper type and resolution (as specified in step
Ã).
For example,
(HP Heavy Coated 300) is a supplied calibration profile for HP
DesignJet Heavyweight Coated Paper based on a resolution of 300 x 300 dpi.
See “Supplied profiles” on page 18 for a full list of supplied calibration profiles.
For optimum results you can choose a calibration set that has been generated for
the actual printer rather than for a reference printer. See “Calibrating the printer”
on page 40 for details.
È Click Page Layout to specify the positioning of the page, using the margin and
centering controls.
Note: If you are using a sheet-fed device, you must refer to details on how to
control top and bottom margins provided in the Page Layout section on page 36.
É Click Save As and enter a page setup name in the Save As text box. Click Save in
the Save Setup dialog box and then
OK in the Page Setup Manager.
You can now use this page setup when printing to produce color managed output.