User's Manual

Install Batteries in the Remote Control

1. On the remote control, set the ON/OFF switch to OFF.

2. Use a screwdriver to open the twin battery compartments. Then

insert four AAA batteries (not included), matching the polarities

(+ and –) marked inside. Replace the cover.

Note: If the remote control’s LED ashes during use, the batteries

are low and should be replaced.

Battery Notes

• Dispose of old batteries promptly and properly. Do not burn or bury them.

Use only fresh batteries of the required size and recommended type.

• Do not mix old and new batteries, dierent types of batteries (standard,

alkaline, or rechargeable), or rechargeable batteries of dierent capacities.

• Remove batteries during longer storage periods. Batteries can leak

chemicals that can damage electronic parts.

6001381_PM_En.indd 5 8/13/2015 5:00:37 PM