User's Manual

9
Replace Damaged Propellers
The left and right propellers of the
drone are dierent, and marked A/B on
the propeller. You must use the correct
propeller in the correct location,
otherwise the drone will fail to take o.
WARNING:
To avoid injury and damage, check the propellers for nicks and breaks
and make sure they are securely attached before and after each ight.
Replace any damaged propellers.
Use only the supplied propellers. Do not alter, modify, or customize the
propellers.
Troubleshooting
Drone does not respond
Make sure the drone and remote control are switched on and paired.
Drone battery maybe low. Fully charge the battery. See “Charge the
Drone.“
Remote control batteries maybe low. Replace the batteries.
Make sure the drone is within the control range (100 ft./30 m) and in line of
sight.
Drone difficult to control
The throttle control is very sensitive. Use small, ne movements to control.
Practice in Ez (Easy) mode.
Propellers maybe deformed or damaged. Adjust propellers by hand. If you
cannot adjust them, replace with the spare propellers.
B
B
A
A
To replace a damaged propeller,
use a screwdriver to remove the
old propeller. Insert a new matching
propeller onto the propeller axle,
then screw securely, but do not
overtighten as the propeller then
won't turn.
6001432_PM_En.indd 9 6/21/2016 12:04:23 PM