User's Manual

Note: If the remote control’s LED ashes during use, the batteries are low

and should be replaced.

Battery Notes

• Dispose of old batteries promptly and properly. Do not burn or bury them. Use

only fresh batteries of the required size and recommended type.

• Do not mix old and new batteries, dierent types of batteries (standard,

alkaline, or rechargeable), or rechargeable batteries of dierent capacities.

• Remove batteries during longer storage periods. Batteries can leak chemicals

that can damage electronic parts.

About Expert/ Easy Fly Modes (Ex/Ez)

This drone is designed with 2 play modes:

Ex (Expert) for advanced pilots to y at a higher speed and

perform stunts.

Ez (Easy) for beginners and new drone owners. This operates at a slower

speed to help you focus on basic navigation and develop a feel of the

throttle's sensitivity. By default, in Ez mode, the stunt and speed options are

disabled to prevent them from being accidentally activated.

• When pairing and ying for the rst time, we recommend you use Ez for

test ights and honing your takeo, steering and landing skills.

Pairing

1. Turn on the drone. The drone's LEDs ash.

2. Place the drone on level ground.

3. Turn on the remote control to Ez or Ex . The remote control's LED

ashes.

4. Move the throttle all the way up and then down to pair the remote control

with the drone. The drone’s propellers remain still during pairing. When

paired, the LEDs on both the remote control and drone light steadily.

Note: If pairing fails, turn o the drone and remote control and repeat the

steps above, or change locations to avoid electrical interference.

6001432_PM_En.indd 5 6/21/2016 12:04:22 PM