User's Manual

12
Using the Camera
For good pictures, use the camera in daylight or well-lit environments.
1. For players using the remote control, align and insert
a Micro SD card (not included) into the card slot in the
direction as marked. Push the SD card in until it clicks.
2. To remove the SD card, press it to eject.
Taking Photos and Videos
When the drone ies stably, on the remote control:
• Press
once to take a photo. The remote control beeps and the drone's
back LEDs ash once.
• Press
to record a video. Press again to stop recording and save
your le recording.
• To y and shoot video in a beeline, press
.
• To shoot video in 360° panoramic view, press
and the drone will
automatically steadily rotate whilst hovering. Press
again to stop
shooting and return to normal ight mode.
Note:
• Video recordings are without audio, in order to omit the roaring drone motor.
• The remote control beeps and the drone's back LEDs ash repeatedly
during recording.
• The video recorded may fail to play in some video applications if (1) the SD
card falls out due to a crash; (2) you remove the SD card before stopping
recording; (3) battery power was too low during recording.
Download Accelerator App
1. For Android and iOS users, go to Google Play
TM
or App Store
SM
respectively to download Accelerator app
2. Follow screen instructions to install the app.
3. After installation, turn on the drone. The drone's LEDs start ashing
indicating pairing mode.
4. On your smart device, open the Wi-Fi setting to start searching for the list
of available Wi-Fi networks. Select the network named RS-xxxxxx (where
x represents an unique code.)
5. On your smart device, tap on
Accelerator app icon to open the app. When the
main menu screen appears, select "TAP TO BEGIN" to enter the app
control screen.
6. Upon successful connection with your drone, the drone LEDs stop
ashing and light up steadily.
7. Familiarize yourself with the onscreen app controls. Have fun ying!
6001436_UG_EN pre-inspection print.indd 12 8/26/2016 6:52:38 PM