User's Manual

10 11
Pairing
1. Turn on the drone. The LEDs on the drone ash.
2. Place the drone on level ground.
3. Turn on the remote control. The remote control's LED lights up.
4. Move the throttle all the way up and then down to pair the remote control
with the drone. The drone’s propellers remain still during pairing. When
paired, all LEDs on both the remote control and drone light steadily.
Note: If pairing fails, turn o the drone and remote control and repeat the steps
above, or change locations to avoid electrical interference.
Multiple Player Pairing
You can play together with friends to y up to 6 Accelerators side by side.
Before pairing, make sure all players have switched o their Accelerators and
remotes. Players must pair their unit separately to avoid interference. Once
paired, keep your unit switched on, until the other players have also completed
pairing.
Fly Your Drone
1. There are 2 ways to take o. Place your drone on the ground and then either:
• Press the
button. The drone will automatically take o, ascending
about 5 ft (150cm) and then hover.
• Move the throttle forward to ascend. To avoid ground air turbulence, y
the drone at least 1 ft. (30cm) o the ground.
2. For speed options, push the steering control in to switch between high
speed (double beep) and low speed (single beep).
IMPORTANT: If your drone crashes upside down, pull the throttle all the way
down. Wait till the propellers have stopped still before you handle the drone.
Land Your Drone
Automatically: Press and the drone will steadily descend and land.
Manually: Slowly move the throttle backward to descend. Avoid moving the
throttle too quickly, as it can stop the propellers instantly and cause the drone to
crash.
• When you nish ying the drone, turn o the remote control and drone.
Trim Your Drone
Push the throttle forward and observe how the drone reacts.
Forward/Reverse Movement Trim: If the drone tends to move forward, press
6
; if it tends to move backward, press

.
Left/Right Slide Trim: If the drone tends to slide right, press

; if it tends to
slide left, press

.
Note: The remote control beeps when you press a trim control but stops
beeping when you reach maximum trim adjustment.
Fly in "Headless" Mode
Featuring an integrated true-north compass, the drone can automatically align
to y "headless". This simplies steering:
1. During ight, press
on the remote. The drone's front LEDs ash when
headless mode is activated.
2. The drone will now y according to steering, regardless which way the
drone's head faces.
3. Press
again to exit headless mode.
Perform 360° Air Flip Stunt
1. Push the throttle control to activate stunt mode. The remote control
beeps repeatedly.
2. Move the steering lever
right or left to perform a 360 ° barrel roll.
3. The drone automatically exits stunt mode after performing a stunt, or
push in the throttle control again to exit immediately.
IMPORTANT: Make sure there is enough space, at least 6 feet in the air and
minimum clearance of 6 feet in all directions for the drone to perform stunts
without crashing into objects or people.