User's Manual

Replace Damaged Propellers

The left and right propellers of the drone

are dierent (see R/L orientation marking

on propeller underside and on the rotor

axles). You must use the correct propeller

in the correct location, otherwise the

drone will fail to take o.

WARNING:

• To avoid injury and damage, inspect the propellers for nicks and breaks and

make sure they are securely attached before and after each ight. Replace

nicked, chipped, cracked or broken propellers.

• Use only the supplied propellers. Do not alter, modify, or customize.

Troubleshooting

Drone does not respond

• Make sure the drone and remote control are switched on and paired.

• The drone battery may be low. Fully charge the battery. See “Charge the

Drone Battery.“

• Remote control battery may be low. Replace the batteries.

• Make sure the drone is within the control range (200 ft./60.96m) and in line

of sight.

Drone difficult to control

• The propellers may be deformed due to a crash. Adjust deformed propellers

by hand. If you cannot adjust them, replace with the spare propellers.

• The throttle control is very sensitive. Use small, ne movements to control.

• If you are a beginner, set to low speed mode, use the takeo and landing

button

, and Special mode. See “Fly Headless in Special Mode.“

To replace a damaged propeller,

use a screwdriver to remove the

old propeller. Insert a new matching

propeller onto the propeller axle, then

screw securely, but do not overtighten

otherwise the propeller won't turn.

6001434_UG_EN.indd 13 7/6/2016 3:25:49 PM