User`s guide

ZvRemote ZvRemote

Mode Buons

Pressing a mode buon tells the remote which

device you want to control.

ZV: Sets remote to control computer.

TV1, TV2, TV3: Selects which TV or system

is controlled (or the “acve” TV), which is

selected by pressing TV1, TV2, or TV3.

For example, TV1 could be in the family room,

TV2 in the oce, and TV3 in the bedroom.

Install Baeries

Insert AA baeries in compartment on back, as shown.

“Pair” ZvRemote with ZvReceiver

ZvRemote must be “paired” with ZvReceiver in order

to communicate with it. Normally, when you rst

install the baeries in ZvRemote, it automacally

pairs with ZvReceiver (if ZvReceiver is plugged into

the computer). If necessary, you can manually pair

the two:

1. On ZvReceiver press the “connect” buon and a

yellow light will blink

2. On ZvRemote, press and hold the and  but-

tons unl a blue light ashes on ZvReceiver.