User`s manual

Quick Start Guide, document 96-00523-07 Page 5 of 5
GS8 Modular Gateway
7.6 Register Address: Enter the IP address and port number of the GS8 modular gateway, for exam-
ple
192.168.1.100:5060 or optionally leave blank.
7.7 Registration Expiry (sec): Enter
0 or optionally leave blank.
7.8 Click Add.
7.9 Select Provision | Route.
7.10 Sub Group ID: Keep as the default 1 unless you have configured additional subscriber groups on
the IP PBX.
7.11 Digit Pattern: Enter the dialing digit pattern used by this route. The pattern comprises digits N (2
to 9), Z (1 to 9), X (0 to 9), and + (any number of digits following the number), for example
8+ if
8 is the code to make calls on the GS8 modular gateway.
7.12 Description: Enter an optional text description of this route, for example GS8.
7.13 Trunk List: Select the trunk ID you just created for the GS8 modular gateway and add to the
Used field, for example 98.
7.14 Strip: The number of digits, starting from the left, to strip off from the dialled number. For exam-
ple, suppose you entered 1 for this field and you dialled 81-408-587-9333. The dialled number will
translate to 1-408-587-9333.
7.15 Prepend: The number to add in front of the dialled number. For example, suppose you entered
1408 for this field and you dialled 587-9333. The dialled number will translate to 1-408-587-9333.
7.16 Append: The number to add after the dialled number.
7.17 Click Add.
The two systems should now communicate and allow you to make and receive calls from the GSM or
CDMA network to the IP PBX.
Please reference the GS8 Modular Gateway User’s Manual and the SE System Exchange User’s Manual
for complete details of the configurations.