Important Safety Instruction Thank you for purchasing the JUKEBOX BAR 100A Soundbar, Please read this user manual carefully and keep for future reference, Warning ee RISK OF ELECTRIC SHOCK] DO NOT OPEN TE REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) Caution: = To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture, No user serviceable parts inside.
The lightning flash within an equilateral triangle is intended to alert you to the presence of insulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute an electric shock to 2 Person or persons. important! This symbol alerts you to read and observe important warnings and instructions on the unit or in this manual.
2. Never use the device unsupervised! Switch off the device whenever you are not using it, Sven if not using it only for a worthwhile, 3. The appliance is not intended to be operated by means of an external timer or separate remote control system, 4, If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid hazard, 5.
magnetic field, 11. Do not place the unit on a amplifier or receiver, 12. Do not place this unit in a damp area as the moisture will affect the life of electric components, 13. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly damp cloth, 14. When removing the power plug from the wall outlet, always pull directly on the plug, never pull on the cord. 15.
Instructions. 5, Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus {including amplifiers) that produce heat. 6. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles or at the point where they exit from the apparatus. 7. Only use attachments/accessories specified by the manufacturer, 8. Unplug this apparatus during lightning storms or when unused for long periods of time. 9.
= The apparatus should not be exposed to dripping, splashing or placed in a humid atmosphere such as a bathroom. = Do not install the product in the following areas: + Places exposed to direct sunlight or close to radiators. + Forefather stereo equipment that radiate too much heat-Blocking ventilation or ina dusty area, + Areas where there transubstantiation, * Humid or moist places. = Outplacement near candles or other flames. = Operate the product only as instructed in this manual.
1.8 : Standby rode for power nonfood, 2. INPUT : Input mode Selection. 3. Volt : Volume Increase. 4. 1 2 Previous Track (Only work under USB & BT Mode). 5. Vol: Volume Decrease. 6. RTE-: Treble Decrease. 7. Bass-: Bass Decrease. B. Mute : Mute Mode. G9. WJ RESET Play/Pause ; Play / Faust for Current Track (Only work under USH and BT made). Reset: Press and hold the button more than 2 see. to Set all functions to manufacturer defaults, 10 #1 : Next Track {Only work under USE & BT mode). 11.
Positioning the Sound Bar Place on a flat Surface Place the sound bar horizontally on a flat surface such as a TV unit or shelves and align it centrally with the TV screen, Allow some space between the speaker and the wall. Don't place inside a cabinet or an a walled shelf, Follow this guidance for best sound output and good airflow around the sound bar, OPERATE INSTRUCTIONS Setting the Soundbar 1. Plug the power cord in and the LED will light up. 2.
Cyan matriarchs) Mode Yellow Coaxial mode Pink :USB Mode Powering On/Off 1. Plug the sound bar adapter into a wall outlet, it will automatically enter standby mode, 2. short-press the power/standby button either in soundbar or remote control to turn on the soundbar, 3. To turn off, press either the STANDBY button on remote control or soundbar or unplug from wall outlet. [res =me} Playing Audio via BT Connection 1. Use “input’ button on the remote to activate BT mode.
4. The remote control includes BT mode playback controls Notes: « if your pairing device switched off or manual disconnected, the sound bar will automatically enter pairing mode. « if the connected device is switched off or mud disconnected, the sound bar will automatically enter peeing successfully connected device will be re-established acne you re-enter wireless ironmonger meters, to connect to other devices, repeat the above pairing steps » There is no automatic shutdown in pairing mode.
extension cable connected to the USE port); music will automatically play. 3. The remote control includes USE input mode playback controls, | = dw Using the Soundbar ~@ He Audio antivivisectionist 1. Use the “Input” button on the remote to activate AUX mode. A green LED indicator will indicate that AUX made has been selected, 2.
HDMI{ARC) Mode 1. Use the “Input” button on the remote to active MATRIARCH) mode. A Cyan LED Indicator will Indicate that MILLIARD) mode has been selected. 2. The Soundbar supports HDMI with Audio Return Channel{ARC). If your TV is HDMI ARC compliant, you can hear the TV audio through your Soundbar by using a single HDMI cable 3. Using a High Speed HDMI cable, connect the HDMI (ARC) connector on the soundbar to the HDMI ARC connector on the TV.
Coaxial Mode 1. Use either the buttons on the Sound Bar or the “Input” button on the remote io active Coaxial mode, A yellow LED indicate will indicate that Coaxial mode has been selected. 2.
EI ere mi rm | BEE Sm Ea ERS Sah | —— resend Er |B rrr SITE mes som en Er Piranha ot A LOT tn EUR RR. [ETT porno— Somme, | peseta: SE =5 Er EEE en mma mia | mma | ras in | ore er mmr | mm Phisher SAT TTS flier. Lae DESULTORILY |e haa SBC, — Sen ry prey re i" E5€r 90012045 Certified Company wwrw.zabronics.
