Important Safety Instruction Thank you for purchasing the JUKEBOX BAR 3600 PRO Soundbar, Please read this user manual carefully and keep for future reference, Warning ee RISK OF ELECTRIC SHOCK] DO NOT OPEN TE REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) Caution: = To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture, No user serviceable parts inside.
The lightning flash within an equilateral triangle is intended to alert you to the presence of insulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute an electric shock to 2 Person or persons. important! This symbol alerts you to read and observe important warnings and instructions on the unit or in this manual.
2. Never use the device unsupervised! Switch off the device whenever you are not using it, Sven if not using it only for a worthwhile, 3. The appliance is not intended to be operated by means of an external timer or separate remote control system, 4, If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid hazard, 5.
magnetic field, 11. Do not place the unit on a amplifier or receiver, 12. Do not place this unit in a damp area as the moisture will affect the life of electric components, 13. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly damp cloth, 14. When removing the power plug from the wall outlet, always pull directly on the plug, never pull on the cord. 15.
Instructions. 5, Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus {including amplifiers) that produce heat. 6. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles or at the point where they exit from the apparatus. 7. Only use attachments/accessories specified by the manufacturer, 8. Unplug this apparatus during lightning storms or when unused for long periods of time. 9.
= The apparatus should not be exposed to dripping, splashing or placed in a humid atmosphere such as a bathroom. = Do not install the product in the following areas: + Places exposed to direct sunlight or close to radiators. + Forefather stereo equipment that radiate too much heat-Blocking ventilation or ina dusty area, + Areas where there transubstantiation, * Humid or moist places. = Outplacement near candles or other flames. = Operate the product only as instructed in this manual.
Product Representation Sound Bar EEG 1. LED Indicator 2. MATRIARCH) 5 OPTICAL 4. AUX “ 5 DON 6 vol 7.
1.8 : Standby rode for power nonfood, 2. Pal: Connect or Disconnect to the Paling Device, {Press the Bunion more than 2 Seconds) 3. VOL Master Volume Up, 4. Wd: Previous Track (Only work under USB & BT Mode). 5. OWL-: Master Volume Down, 8. MUSIC Select the Music BQ effect. 7. THE Treble Volume Up. 8. TREE-: Treble Volume Down. 9. MUTE: Mute Mode, 10. INPUT: Input model AU USB/HDMIARCYOPT/ET) TT. wi: Nan Track {Only work under USE & BT modal.
Positioning the Sound Bar Place on a flat Surface Place the sound bar horizontally on a flat surface such as a TV unit or shelves and align it centrally with the TV screen, Allow some space between the speaker and the wall.
Follow below steps to mount the sound bar on the wall 1. Make 2 holes on the wall with distance same haste wall bracket on the soundbar 2. Put the plastic anchors onto the wall and secure the screws to the plastic dip, do not tighten the screws all the way make sure leave some space 3. Attached the 2 EVA pads onto the wall mount bracket.
OPERATE INSTRUCTIONS Setting the Soundbar 1. Plug the power cord in and the LED will fight up. 2. Press the INPUT button to select the mode you need with the remote controller. 3. The indicator can change into 6 different colors, representing different states; Red Standby Blue Outmoded Green :Aux Mode Cyan MURCIA Mode Yellow : Optical mode Pink USB Mode Powering On/Off 1. Plug the sound bar adapter into a wall outlet, it will automatically enter standby mode. 2.
#laying Audio via BT Connection 1. Use either the buttons on the Sound Bar or the "Input’ button on the remote to activate ET mode. A Blue LED indicator will indicate that BT mode has been selected. 2. Activate the pairing function on your phone of other compatible device and select “JUKEBOX BAR 3600 PROD", 3. When successfully paired, you will hear a tone and the LED will stay on, 4.
1. Ensure that your USE flash drive contains MP3 audio files {other file types not supported) Z. Connect the USE flash drive to the USB port on the sound bar {or your own USB extension cable connected to the USE port); music will automatically play. 3. The remote control includes USE input mode playback controls Audio Input (AUX) Connection 1. Use either the buttons on the Sound Bar or the “Input” button on the remote to activate AUX mode. A green LED indicator will indicate that AUX mode has been selected.
HDMI ARC) Mode 1. Use either the buttons on the Sound Bar or the "Input" button on the remote to active HMI (ARC) mode, A Cyan LED indicator will indicate that HDMI (ARC) mode has been selected, 2. The Soundbar supports HDMI with Audio Return Channel (ARC), If your TV is HDMI ARC compliant, you can hear the TV audio through your Soundbar by using a single HDMI cable, 3. Using a High Speed HDMI cable, connect the HDMI (ARC) connector on the soundbar to the HDMI ARC connector on the TV.
2. Playback functions (play/pause, tracks, pair) cannot be adjusted through the Sound Bar remote when in Optical mode. Others playback functions can be controlled from the buttons on the Sound Bar.
Package Contents: Sound Bar Power Adapter Remote Control input cable Rodeo guide Wall mount bracket with fasteners E5€r 90012045 Certified Company wwrw.zabronics.
