Quick Start Guide

Preparing the Printer for Use
6
P1060608-004 11/5/15
11. To verify that the media and ribbon are loaded correctly, print a printer configuration
label.
a. Press and hold the CANCEL button.
b. Turn on (I) the printer.
The printer boots up and performs a self-test. The results of the self-test are shown in
Table 1. If the media and ribbon are loaded correctly, the printer prints a printer
configuration label (Figure 3) and then a network configuration label (Figure 4).
Figure 3 • Sample Printer
Configuration Label
Figure 4 • Sample Network
Configuration Label