Operation Manual

Printer Setup and Operation

Print a Test Label and Make Adjustments

11/5/15 P1048261-005

Print a Test Label and Make Adjustments

After you have loaded media, loaded ribbon (if using Thermal Transfer mode), installed the

printer driver, and connected your printer to your computer, use the directions in this section to

print a test label. Printing this label allows you to see if your connection is working and if you

need to adjust any of the printer settings.

To print a test label and adjust the printer (if necessary), complete these steps:

1. Open the Zebra Setup Utilities to return to the Zebra Setup Utilities screen.

2. Click on one of the available print drivers for your printer.

3. Click Open Printer Tools.

The Tools window displays the available printer commands.