Operation Manual

Specifications
General Specifications
176
P1048261-005 11/5/15
General Specifications
Model ZT230 ZT220 ZT210
Height 10.9 in. (277 mm) 11.0 in. (280 mm) 10.9 in. (277 mm)
Width
9.5 in. (242 mm) 9.4 in. (239 mm) 9.5 in. (242 mm)
Depth 17 in. (432 mm) 17 in. (432 mm) 17 in. (432 mm)
Weight 20 lb (9.1 kg) 17 lb (7.8 kg) 20 lb (9.1 kg)
Electrical 100–240 VAC, 47-63 Hz, 3 Amps (100 W)
Temperature Operating Thermal Transfer: 41° to 104°F (5° to 40°C)
Direct Thermal: 32° to 104°F (0° to 40°C)
Storage –40° to 140°F (–40° to 60°C)
Relative
Humidity
Operating 20% to 85%, non-condensing
Storage 5% to 85%, non-condensing
Communication
Interface
Specifications
Standard USB 1.1 Data Interface
Limitations and Requirements
• Maximum cable length of 16.4 ft (5 m).
Connections and Configuration
No additional configuration is necessary.
• Optional interface (one of the following):
• 8-bit parallel data interface; nibble mode compliant
• 802.11a/b/g/n wireless card support
RS-232/CCITT V.24 Serial Data Interface
• 2400 to 115000 baud
• parity, bits/character
• 7 or 8 data bit
• XON-XOFF, RTS/CTS, or DTR/DSR handshake protocol
required
• 750mA at 5 V from pins 1 and 9
Limitations and Requirements
• You must use a null-modem cable to connect to the printer or
a null-modem adaptor if using a standard modem cable.
• Maximum cable length of 50 ft (15.24 m).
• You may need to change printer parameters to match the host
computer.
Connections and Configuration
The baud rate, number of data and stop bits, the parity, and the
XON/XOFF or DTR control must match those of the host
computer.
(Continued on next page.)