Operation Manual

137
Routine Maintenance
Cleaning Schedule and Procedures
11/5/15 P1048261-005
To clean the printhead and platen roller, complete these steps:
1. Raise the media door.
2.
3.
Remove the ribbon (if used) and the media.
Caution • The printhead may be hot and could cause severe burns. Allow the printhead
to cool.
Caution • Before touching the printhead assembly, discharge any built-up static electricity
by touching the metal printer frame or by using an antistatic wriststrap and mat.
Caution • The printhead may be hot and could cause severe burns. Allow the
printhead to cool.
Rotate the printhead-open lever upward to release the printhead assembly.