Operation Manual

127
Printer Configuration and Adjustment
Adjust the Printhead Pressure
11/5/15 P1048261-005
Adjust the Printhead Pressure
You may need to adjust printhead pressure if printing is too light on one side, if you use thick
media, or if the media drifts from side to side during printing. Use the lowest printhead
pressure necessary to produce good print quality.
See Figure 16. The printhead pressure adjustment dials have setting marks from 1 to 4 in
half-mark increments.
Figure 16 • Printhead Pressure Adjustment Dials
If necessary, adjust the printhead pressure adjustment dials as follows:
1
Inside dial
2
Outside dial
1
2
If the media... Then...
Requires higher pressure to print
well
Increase both dials one position.