Operation Manual

125
Printer Configuration and Adjustment
Calibrate the Ribbon and Media Sensors
11/5/15 P1048261-005
8. Press PAUSE to begin the media calibration process.
• The PAUSE light turns off.
• The SUPPLIES light flashes.
• The control panel (ZT230 printer only) displays:
When the process is complete:
• The SUPPLIES light stops flashing.
• The PAUSE light flashes yellow.
• The control panel (ZT230 printer only) displays:
9. Open the printhead assembly by rotating the printhead-open lever.
MEDIA/RIBBON CAL
CALIBRATING
PLEASE WAIT
MEDIA/RIBBON CAL
RELOAD ALL
CONTINUE