Operation Manual

Printer Configuration and Adjustment
Changing Printer Settings
118
P1048261-005 11/5/15
Sensor Settings
Table 9 • Sensor Settings
SENSOR TYPE
Sensor Type Select the media sensor that is appropriate for the media that you are using. The
reflective sensor can be used with all media types. The transmissive sensor should be
used only for simple gap media.
User menu item:
Main Menu >
SENSORS
Accepted values:
• TRANSMISSIVE
• REFLECTIVE
Related ZPL command(s):
^JS
SGD command used:
device.sensor_select
Printer web page: View and Modify Printer Settings > Media Setup
LABEL SENSOR
Label Sensor Set the sensitivity of the label sensor.
Important • This value is set during sensor calibration. Do not change this
setting unless you are told to do so by Zebra Technical Support or by an
authorized service technician.
User menu item:
Main Menu >
SENSORS
Accepted values:
0 – 255
SGD command used:
ezpl.label_sensor
Printer web page: View and Modify Printer Settings > Calibration