Operation Manual

115
Printer Configuration and Adjustment
Changing Printer Settings
11/5/15 P1048261-005
COMMAND LANGUAGE
Command
Language
Enable this menu item to allow certain ZPL commands to override the printer’s current
settings.
User menu item:
Main Menu >
LANGUAGE
Accepted values:
• EPL_ZPL
• HYBRID_XML_ZPL
• EPL
SGD command used:
device.languages
ZPL OVERRIDE
ZPL Override
Enable ZPL Override
Enable this menu item to prevent the following ZPL commands from changing the
printer’s current settings:
• ^MM (print mode)
• ^MT (Direct Thermal or Thermal Transfer print method)
• ^MN (media type non-continuous or continuous)
When this menu item is disabled, these commands override the printer’s settings.
User menu item:
Main Menu > LANGUAGE
Accepted values:
• DISABLED
• ENABLED
SGD command used:
zpl.zpl_override
Table 8 • Language Settings (Continued)
▼
COMMAND LANGUAGE
EPL_ZPL
▲