Operation Manual

97
Printer Configuration and Adjustment
Changing Printer Settings
11/5/15 P1048261-005
PRINT MODE
Print Mode Select a print mode that is compatible with your printer options.
For information about how the print mode selections work with different printer
options, see Select a Print Mode on page 62.
User menu item:
Main Menu >
SETTINGS
Accepted values:
• TEAR OFF
• CUTTER
• PEEL (use this value for peel-off or liner take-up
printing)
Related ZPL command(s):
^MM
SGD command used:
media.printmode
Printer web page: View and Modify Printer Settings > General Setup >
Print Mode
LEFT POSITION
Label Left
Position
If necessary, shift the print position horizontally on the label. Positive numbers move
the left edge of the image toward the center of the label by the number of dots selected,
while negative numbers move the left edge of the image toward the left edge of the
label.
User menu item:
Main Menu >
SETTINGS
Accepted values:
–9999 to 9999
Related ZPL command(s):
^LS
SGD command used:
zpl.left_position
Printer web page: View and Modify Printer Settings > Advanced Setup >
Left Position
Table 5 • Print Settings (Continued)