Operation Manual

95
Printer Configuration and Adjustment
Changing Printer Settings
11/5/15 P1048261-005
TEAR OFF
Tear-Off Position If necessary, adjust the position of the media over the tear-off bar after printing.
User menu item:
Main Menu >
SETTINGS
Accepted values:
–120 to 120
• Higher numbers move the media out (the tear line
moves closer to the leading edge of the next label).
• Lower numbers move the media in (the tear line
moves closer to the edge of the label just printed).
Related ZPL command(s):
~TA
SGD command used:
ezpl.tear_off
Printer web page: View and Modify Printer Settings > General Setup >
Tear Off
Table 5 • Print Settings (Continued)
1
2
1
Media direction
2
Factory-set tear line location at
position 000