Operation Manual

177
Specifications
General Specifications
11/5/15 P1048261-005
Communication
Interfaces
(continued)
Optional
(only one of the
following may be
installed at a
time)
Wired 10/100 Internal Ethernet Print Server
Limitations and Requirements
• The printer must be configured to use your LAN.
• A second wired print server can be installed in the bottom
option slot.
Connections and Configuration
Refer to the ZebraNet Wired and Wireless Print Servers User
Guide for configuration instructions. A copy of this manual is
available at http://www.zebra.com/manuals.
Wireless print server
802.11 b
• 2.4GHz
• DSSS (DBPSK, DQPSK and CCK)
• RF power 10 mW (ZebraNet b/g Print Server)
802.11 g
• 2.4GHz
• OFDM (16-QAM and 64-QAM with BPSK and QPSK)
• RF power 10 mW (ZebraNet b/g Print Server)
Limitations and Requirements
• Can print to the printer from any computer on your Wireless
Local Area Network (WLAN).
• Can communicate with the printer through the printer’s web
pages.
• The printer must be configured to use your WLAN.
• Can be installed only in the top option slot.
Configuration
Refer to the ZebraNet Wired and Wireless Print Servers User
Guide for configuration instructions. A copy of this manual is
available at http://www.zebra.com/manuals.
8-bit Parallel data interface
nibble mode compliant
Limitations and Requirements
• Maximum cable length of 10 ft (3 m).
• Recommended cable length of 6 ft (1.83 m).
• No printer parameter changes required to match the host
computer.
• Can be installed in either the top or bottom option slot.
Connections and Configuration
No additional configuration is necessary.
Firmware • ZPL II
®
• Zebra Global Printing Solution
• EPL™ (optional, 203 dpi models only)
• WebView and Alert
• ZBI 2.0 (optional)
Model ZT230 ZT220 ZT210