Operation Manual

111
Printer Configuration and Adjustment
Changing Printer Settings
11/5/15 P1048261-005
IP PROTOCOL
IP Protocol This parameter tells if the user (permanent) or the server (dynamic) selects the
IP address. When a dynamic option is chosen, this parameter tells the method(s) by
which the wired or wireless print server receives the IP address from the server.
User menu item: *
* This menu item appears only if a
wired or wireless print server is
installed in your printer.
Main Menu > NETWORK
Accepted values:
• ALL
• GLEANING ONLY
• RARP
• BOOTP
• DHCP
• DHCP & BOOTP
• PERMANENT
Related ZPL command(s):
^ND
SGD command used: Wired:
internal_wired.ip.protocol
Wireless:
wlan.ip.protocol
Printer web page: View and Modify Printer Settings >
Network Communications Setup >
TCP/IP Settings
ACTIVE PRINT SERVER
Active Print
Server
Only one print server (wired or wireless) can be installed at a time. Therefore, the print
server installed is the active print server.
User menu item: *
* This menu item appears only if a
wired or wireless print server is
installed in your printer. It cannot
be modified from the control
panel.
Main Menu > NETWORK
Table 7 • Network Settings (Continued)