Operation Manual

109
Printer Configuration and Adjustment
Changing Printer Settings
11/5/15 P1048261-005
Network Settings
Table 7 • Network Settings
IP ADDRESS
IP Address View and, if necessary, change the printer’s IP address.
To save changes to this setting, set IP Protocol on page 111 to PERMANENT, and then
reset the print server (see Reset Network on page 113).
User menu item: *
* This menu item appears only if a
wired or wireless print server is
installed in your printer.
Main Menu > NETWORK
Accepted values:
000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used: Wired:
internal_wired.ip.addr
Wireless: ip.addr, wlan.ip.addr
Printer web page: View and Modify Printer Settings >
Network Communications Setup >
TCP/IP Settings
SUBNET MASK
Subnet Mask View and, if necessary, change the subnet mask.
To save changes to this setting, set IP Protocol on page 111 to
PERMANENT, and then
reset the print server (see Reset Network on page 113).
User menu item: *
* This menu item appears only if a
wired or wireless print server is
installed in your printer.
Main Menu > NETWORK
Accepted values:
000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used: Wired:
internal_wired.ip.netmask
Wireless: wlan.ip.netmask
Printer web page: View and Modify Printer Settings >
Network Communications Setup >
TCP/IP Settings