User Manual

93
ZQ630 User Guide
SIGNAL
0
View the wireless signal strength when
the wireless network is active and
authenticated.
SGD: wlan.signal_strength
WIRED IP ADDRESS
0.0.0.0
View, and if necessary, change the
printer’s wired IP address.
SGD: internal_wired.ip.addr
WIRED SUBNET MASK
255.255.255.0
View, and if necessary, change the
printer’s wired subnet mask.
SGD: internal_wired.ip.netmask
WIRED GATEWAY
0.0.0.0
View, and if necessary, change the wired
gateway setting.
SGD: internal_wired.ip.gateway
WIRED IP PROTOCOL
ALL
This parameter tells if the user (permanent)
or the server (dynamic) selects the IP
address. If a dynamic option is chosen, this
parameter tells the method(s) by which the
wired or wireless server receives the IP
address from the server.
SGD: internal_wired.ip.protocol