User Manual

87
ZQ630 User Guide
PRINT WIDTH
576
Specify the width of the labels being used.
The default value is the maximum width for
the printer based on the printhead’s DPI
value.
SGD: ezpl.print_width
PRINT MODE
REWIND
Select a print mode that is compatible with
your printer options.
SGD: ezpl.print_mode
LABEL TOP
0
If necessary, shift the position of the image
vertically on the label.
• Negative numbers move the image
higher on the label (toward the printhead).
• Positive numbers move the image
farther down on the label (away from the
printhead) by the specied number of dots.
SGD: zpl.label_top
LEFT POSITION
0
If necessary, shift the print position
horizontally on the label. Positive numbers
move the left edge of the image toward the
center of the label by the number of dots
selected, while negative numbers move
the left edge of the image toward the left
edge of the label.
SGD: zpl.left_position
REPRINT MODE
OFF
When reprint mode is enabled, you can
reprint the last label printed either by
issuing certain commands or by pressing
the DOWN ARROW on the keypad.
SGD: ezpl.reprint_mode