User Manual

86
ZQ630 User Guide
Appendix D
SETTINGS Menu
DARKNESS
-49
Set the darkness to the lowest setting
that provides good print quality. If you
set darkness too high, the label image
may print unclearly, bar codes may not
scan correctly, or the printhead may wear
prematurely.
SGD: print.tone_zpl
PRINT SPEED
4.0
Select the speed for printing a label (given
in inches per second). Slower print speeds
typically yield better print quality.
SGD: media.speed
MEDIA TYPE
MARK
Select the type of media that you are
using.
SGD: ezpl.media_type
TEAR OFF
0
If necessary, adjust the position of the
media over the tear bar after printing.
SGD: ezpl.tear_o