User Manual

74
ZQ630 User Guide
Label Specications
Parameter ZQ630
Media Width 50.8 mm (2 in.) to 111 mm (4.4 in.) linered
50.8 mm (2 in.) to 109 mm (4.3 in.) linerless
Max/Min Label
Length
12.7 to 812.8 mm
(0.5 to 32 in.) maximum
Black Bar Sensor to
Printhead Burnline
Distance
15.87 mm (0.625 in.) +/- 0.635 mm (0.025 in.)
Media Thickness
(except Tag)
3.2 to 7.5 mils (0.08128 to 0.1905 mm)
Max Tag Thickness 5.5 mils (0.1397 mm) or less
Max Label Roll
Outer Diameter
66.8 mm (2.6 in.)
Inner Core
Diameters**
19.05 mm (0.75 in.) or 34.925 mm (1.375 in.)
Black Mark Location The reective media black marks should be centered on media roll
Black Mark
Dimensions
Minimum mark width: 12.7 mm (0.5 in.)
Mark length: 2.4-11 mm (0.09 to 0.43 in.)
Note • Use Zebra brand direct thermal media that is outside wound. Media
may be reective (black mark) sensing, or transmissive (gap) sensing, die-
cut, continuous or linerless. For die-cut labels, use only full auto dies.
** ZQ630 printer support coreless media which is 19 mm (0.75 in.) in inner
diameter.
Physical, Environmental and Electrical Specications
Parameter ZQ630
Weight w/ battery
and no media
2.45 lbs. (1.113 kg)
Temperature
Operating: -20 °C to 50 °C (-4 °F to 122 °F)
with or without RFID option
Storage: -25 °C to 65 °C (-13 °F to 149 °F)
with or without RFID option
Charging: 0 °C to 40°C (32 °F to 104 °F)
with or without RFID option
Relative Humidity Operating/Storage: 10% to 90% non-condensing
with or without RFID option
Battery Smart Battery (4 cell) Lithium-Ion, 7.4 VDC (nominal); 6.8 AHr min.
Intrusion
Protection (IP)
Rating
IP43 (without optional environmental case)
IP54 (with case)