User Manual
50
ZQ630 User Guide
Setting Up the Software
ZQ630 printer use Zebra’s CPCL, ZPL or EPL Programming
languages which were designed for mobile printing applications.
CPCL and ZPL are fully described in the ZPL Programming Guide
(p/n P1012728-010), CPCL Programming Guide (p/n P1073699-
001) and ZPL II Programming Guide (p/n 46530L) available on-line
at https://www.zebra.com/us/en/support-downloads.html. You can
also use ZebraDesigner Pro v2, Zebra’s Windows
®
based label
creation program which uses a graphical interface to create and
edit labels in either language. Refer to Appendix H for tips on
downloading the Designer Pro application from Zebra’s Web site.
Designing Labels
The following examples provide guidelines for designing labels
for the ZQ630 printer, specically for Gap Media, Black Bar Media
and Journal Media. The illustrations for each media type dene
recommended tolerances, keep-out zones and safe printing
zones designed to avoid any vertical registration issues during
printing. Dimensions are determined based on product registration
capabilities and Zebra-recommended media tolerances.
Figure 21 • Gap Media
Safe Printing Zone
1.59 mm
1.59 mm
1.25 mm
1.25 mm
“H”
Max Label Height = “H” = 2.5 mm
Bottom edge of
die-cut label
Top edge of
die-cut label
CPCL Label
Height
Media Feed Direction