User Manual

39
ZQ630 User Guide
Figure 16 • Error Alert Message
The user can respond to actions by pressing one of the soft keys
to indicate that an action has been taken to address the alert in
question. Once the condition causing the alert has been addressed
(i.e. loading media), the alert message will be cleared.
Buttons
The user has the ability to use the ZQ630’s multi-button interface to
run the following power-up and runtime sequences.
Power-Up Sequences
Seq. # Function Keys Button
1 Two Key Report Hold down Feed
button while pressing
power button
2 Revert to Factory
WML
Hold down the UP
and DOWN arrows
while pressing power
button
3 Forced Download Hold down both soft
keys while pressing
power button
4 Turn printer On
or O󰀨 or to enter
Sleep Mode
Power button
Note • A user would need to revert to factory WML if some features
were turned o in the custom WML and there is a need to get to
the “full” menu. Also, if a change was made that caused the WML
system to lock up, the user can reboot and restore functionality
temporarily in order to x the mistake.