User Manual

34
ZQ630 User Guide
Status Bar Icons
Indicates Bluetooth
®
connection status. The icon will blink to
show that the printer is receiving label data via Bluetooth, and is
solid blue when link is established. This icon appears only on
printers with the Bluetooth wireless option installed.
Indicates that the printer is connected to a radio
network via 802.11 protocols. The antenna icon will blink with no
parentheses when looking for an access point. One set of solid
parentheses with blinking antenna indicates WLAN is associated
and attempting authentication. Two sets of solid parentheses and
solid antenna indicate the printer is successfully connected to the
WLAN.
The icon and two parentheses will blink to show the printer is
receiving printer data via WLAN. The four (4) bars indicate
the strength of the WLAN connection to the access point. These
icons appear only with the 802.11 radio installed, i.e. one solid
yellow bar, two solid green bars, three solid green bars and four
solid green bars.
The Ethernet icon will blink green when the printer is receiving
label data via the Ethernet connection and solid green when
connected. It will not be displayed on the status bar when the
Ethernet is inactive. This icon appears only when the Ethernet
option is installed and the printer is docked in Ethernet cradle.
The Data icon indicates data being sent to the printer, i.e. the
icon will blink green when there is a label data transmission via
the serial or USB ports. It will be solid green when the parser is
locked.
The Media Out icon will blink red when there is no media in
the printer and will appear solid white when there is media in the
printer.