User Manual

ZQ630 User Guide

2. Pull the media supports apart. Insert the roll of media (in the

orientation shown) between the supports and let the supports

secure the media in place. The supports will adjust themselves

to the width of the media, and the media roll should be able to

spin freely on the supports.

Figure 8 • Loading Media

3. If you plan to use the printer in tear-o󰀨 mode, close the media

cover as shown below.

Close Media

Cover

Pull Media out of

Printer

Note • Please refer to the Programming Guide (P1012728-010) for

information on changing the setting to adjust the media feed length

via a Set-Get-Do (SGD).