User Manual
27
ZQ630 User Guide
Note • For detailed information on the 1-Slot, 3-Slot Battery
Charger and 3-Slot Dual Pack Charger, refer to the P1096323-
101, P1096767-101 and P1097966-101 Quick Start Guides at
https://www.zebra.com/us/en/support-downloads.html
Loading the Media in the ZQ630 Printer
You can operate ZQ630 printer in one of two dierent modes: Tear-
O or Peel-O. Tear-O mode allows you to tear o each label (or
a strip of labels) after it is printed. In Peel-O mode, the backing
material is peeled away from the label as it is printed. When printing
batches, after you remove the label, the next one is printed.
Loading Media Procedure
1. Open the printer (Refer to Figure 7).
• Press the Media Cover Button on the side of the printer as shown
in “1” below. The Media Cover will open automatically.
• Rotate the Media Cover back completely as shown in “2”,
exposing the media compartment and adjustable media supports.
Figure 7 • Opening the Printer
1