User Manual

24
ZQ630 User Guide
Figure 4 • Ethernet Cradle
Height Width Length
66.2 mm (2.6 in.) 200.6 mm (7.89 in.) 219.61 mm (8.64 in.)
Printer Operation with Cradle
• ZQ630 printer will charge when placed in the cradle.
• Docking the printer in the cradle will automatically turn the printer
on to ensure it is available to be managed remotely.
• When the printer detects input power from the cradle, and the
presence of a live Ethernet link, it will automatically connect to the
Ethernet network.
• The 802.11ac radio will be turned o󰀨 when the Ethernet link is
active. It will turn back on if the Ethernet link is no longer active.
• For printers with a Bluetooth radio, this interface will remain active
while the printer is in the cradle.
• The serial and USB ports will remain active while the printer is in
the cradle.
• The DC input barrel jack connector cannot be used while the
printer is in the cradle. The DC barrel jack should be plugged
directly into the cradle instead.