User Manual

ZQ630 User Guide

Ethernet and Charging Cradle

The ethernet cradle is an expansion base intended for use with the

ZQ630 printer. The cradle provides charging power to the docked

printer as well as providing a standard 10/100 Mb/s Ethernet port

for communication to the printer. The cradle also supplies battery

charging power to the docked printer and acts as a supplementary

power source.

The cradle features two LED’s to indicate the status of the cradle:

Solid green to indicate when power is provided to the input of the

cradle; and blinking green to indicate Ethernet activity. The cradle

allows the user to dock the printer easily and remove it with the

push of a button. The printer will remain operable while docked,

i.e. display is viewable, charge LED status is viewable, and printer

controls and data entry are available. The printer will still print while

docked and the user will be able to replace the media as well.

LED Status Indicator

LED Status Indication

Solid Green Power On

Blinking Green Ethernet Activity

Note • Remove the docking contacts cover on the bottom of the

printer before docking the printer in the cradle.

Note • Clean the docking contacts with a Zebra cleaning pen to

remove any residue left behind by the label.