User Manual

18
ZQ630 User Guide
Getting Ready to Print
Battery
Installing/Removing Battery & Battery Tape Insulator
Important • Batteries are shipped in sleep mode to preserve their
maximum capacity while in storage prior to initial use. Plug in the AC
adapter (see page 22) or insert the battery into the 1-Slot Battery
Charger (see page 25) or 3-Slot Battery Charger (see page 29) to
wake it up before using for the rst time.
Removing the Battery
1. If a belt clip is present on the
bottom of the printer, rotate it such
that it provides clearance for the
battery or remove altogether.
2. Depress the latch on the
battery pack (where indicated).
3. Rotate the pack away from
the battery well. Lift the battery up
and out of the printer.