User Manual

11
ZQ630 User Guide
PowerPrecision+ (PP+) Battery
The ZQ630 printer uses a 4-cell Li-Ion battery pack with integrated
intelligence and data storage capability meeting PowerPrecision+
(PP+) functionality. This intelligent battery has the integrated
technology required to collect the detailed realtime battery metrics
needed to maximize useful battery life and ensure every battery is
healthy and able to hold a full charge. In addition, technology inside
the batteries tracks and maintains the metrics required to provide
real-time visibility into more meaningful battery statistics, such
as total cycle usage of the battery, whether the battery is old and
should be retired or how long a battery will take to fully charge.
Operating Temperature Charging Temperature Storage Temperature
-20˚C to +50˚C
(-4˚F to 122˚F)
0˚C to +40˚C
(32˚F to 104˚F)
-25˚C to +65˚C
(-13˚F to 149˚F)
The ZQ630 printer will only function properly with genuine Zebra
smart battery packs.
The smart battery’s health has three states: GOOD, REPLACE,
and POOR. The battery health factor determines whether or not the
printer can operate and what is communicated to the user via the
display.
# of Charge Cycles Health Power-up Message
<300 GOOD None
≥300 but <550 REPLACE “Battery Diminished
Consider Replacing” *
≥550 but <600 REPLACE “Warning-Battery Is Past
Useful Life” *
≥600 POOR “Replace Battery Shutting
Down” **
* Warning accompanied by one long beep.
** Warning will ash on and o󰀨 accompanied by beeping at a
rate of once per second. After 30 seconds the printer will shut
down.
Note • Power down the printer before removing the battery to
minimize the risk of corruption.