Spec Sheet
Lithium-Ion Charging Accessories
Ethernet Cradle
Connect ZQ600 Series printers to your wired Ethernet network via the ZQ600 Series Ethernet cradle to
enable easy remote management by your IT or operations sta — helping to ensure each printer is operating
optimally and ready for use. The Ethernet cradle can communicate over 10 Mbps or 100 Mbps networks using
auto-sense.
The single-bay ZQ600 Series Ethernet cradle also charges the battery while it is in the printer, while the
4-bay version (with optional wall mount kit) charges four printers at a time. The 4-bay version includes an
internal Ethernet switch and second Ethernet port, so you can link and manage four 4-bay Ethernet cradles (a
total of 16 printers) from one port.
The printer remains fully functional so you can print while it is in either cradle. The cradle’s LED lights indicate
DC power and Ethernet-link status.
Remote printer management over your Ethernet allows:
• Battery management for monitoring battery health. Knowing each battery’s lifespan stage simplifies central
management of your spare-battery pool.
• Firmware management for updating printer firmware, eliminating the need for IT sta to travel to the local
user site, or for the printer to be sent back to a central location for updating.
• Print management for updating templates, fonts and graphics in order to print new label formats.
• Device management for updating startup (e.g., config. sys), WML (front panel) or HTML (browser) files to
enhance or change configuration and status collection.
• Network management for updating encryption keys or certificate files to maintain the highest level of security.
• Problem resolution and troubleshooting local printer issues that may otherwise require the printer to be
sent in for repair.
• Ability to manage Bluetooth printers, which traditionally have been o-network.
What comes with the cradle?
Unit with AC Adapter: Cradle, AC adapter, power cord and document CD including cradle user manual and
installation guide.
Cradle Unit: Cradle and document CD including cradle user manual and installation guide
(AC adapter can be purchased separately).
AC Adapter
Connect the AC adapter to your ZQ600 Series printer and wall outlet to charge the printer’s PowerPrecision+
battery while in the printer. The printer can print labels and perform other functions during charging. Shown
with printer for reference purposes; printer is not included.
Cradle
Dock and charge a single ZQ600 Series printer in a vehicle or on a forklift. Includes 15-60V DC power supply.
Can be optionally used with a RAM Arm mount.*
Single-bay
Ethernet Cradle
4-bay
Ethernet Cradle
*Only available on ZQ610 & ZQ620
ZQ600 Accessories
The ZQ600 Series oers all the accessories you need, from power and charging to carrying and protection options,
cables and more. Please refer to the Mobile Printer Accessory Guide, found on Zebra.com, for all the accessories available
for the ZQ600 Series.
Continued on following page
3
PRODUCT SPEC SHEET
ZQ600 SERIES MOBILE PRINTERS