Datasheet

Zebra ZQ500 Series Mobile Printers 5
Accessory Requirements and Compatibility Product Image
WIRING & ADAPTERS
D-Ring Adapter
Kit
Attaches to ZQ500 vehicle cradle to enable use with installed Datamax O’Neil
e-charge brackets. Plastic female half-moon part allows users to attach ZQ500
vehicle cradle to existing Datamax O'Neil brackets.
RW420 Vehicle
Cradle Adapter
Enables attachment of ZQ500 Series cradle to existing RW cradles without
rewiring. Measures 6 inches. Legacy RAM arms are compatible with ZQ500 via this
adapter.
CARRYING
2-Roll Spare
Media Case
Carries two rolls of spare ZQ500 media. Attaches between the RAM arm and
Vehicle Cradle.
Belt Clip* Allows printer to be clipped to user’s belt.
Hand Strap Enables printer to be carried like a toolbox.
Rugged
Shoulder Strap
Offers over-the-shoulder carrying option. Connects with metal attachment clips.
Standard
Shoulder Strap
Offers over-the-shoulder carrying option. Connects with plastic attachment clips.
Swivel Belt Loop Alternative to a standard belt clip. One piece connects to the user’s belt and one
piece (D-Ring Adapter Belt Attachment) attaches in lieu of the belt clip on the
ZQ500, so you can easily attach and rotate the printer to the hip.
PROTECTION
Exoskeleton
Case**
Increases drop specification, seals off ports and increases IP rating for extreme use
environments. Can be used with extended battery pack, 4-bay power station and
vehicle cradle. Cannot be used with linerless. Users must tear down when using
exoskeleton. Not compatible with belt clip included with printer. AC adapter and
vehicle charger cannot be used when printer is in exoskeleton case.
Soft Case Canvas case adds layer of printer protection. Includes shoulder strap. Battery
(including extended pack) and ports remain accessible via flaps. Cannot be used
with printer belt clip.
OTHER
USB Cables with
Strain Relief
Prevents USB cable breakage via hard plastic twist lock.
USB Cable
(Micro A/B
to USB A
converter- 6")
Adapter cable for connecting USB memory sticks or other traditional USB A
devices to the printer.
Encrypted
Magnetic Stripe
Reader Module
Attaches to printer to enable payment processing and reading of licenses, credit
cards and badges. Encryption keys can be loaded via Zebra Custom Application
Group.
*Included in the box with your Zebra ZQ510 or ZQ520 printer. **The battery eliminator vehicle charger and exoskeleton case will not be available at initial release.