Installation guide

P1073631-001 pg. 7

pg. 6 P1073631-001

Caution: Never install or remove the equipment from the vehicle’s electrical system while the

vehicle is running. This may result in permanent damage to the equipment.

Warning: It is very important to ensure that you make the correct cable to power source connections,

because electrical energy from a vehicle’s power system can harm equipment and people.

Caution: Ensure that the Power Supply has proper cooling. Do not place any padding or cushioning

material under the unit or next to the back of the unit.

Electrical Information

Power Supply Input: 12VDC to 48VDC

Caution: Since the Mobile Battery Eliminator consumes vehicle power even when the printer

is turned off, it MUST be connected to a power source that is switched off when the vehicle

is turned off.

Zebra Technologies Corporation is not liable for damage to any equipment caused by improp-

er installation of this equipment to any power source.

The following instructions for the Mobile Battery Eliminator Kit include the equipment listed

below:

• P1063406-028 : KIT, Acc Battery Eliminator Cradle, ZQ500 Series

• P1058934: DC to DC Power Adapter, 7.8V, 5A Output

• P1064241: DC to DC Power Adapter, Cigarette, 7.8V, 5A OUTPUT

• AT17147-1: RAM MOUNT RAM-101

• CA17359-1: PLATE,RAM,MNTG (Base Plate)

Indicator and Parts Descriptions

Descriptions

1. 12-pin docking port connector for printer

2. USB port Type A Host

3. USB port Micro B

4. Power Indicator

5. RAM mount fixing holes (4)

6. Printer release button

7. Printer connector

8. D-shape adaptor mounting holes (4)

9. D-shape adaptor (4 screws)

(1 not visible)

Figure 1: Parts DescriPtions